Dell Alienware 17 R4 Service Manual - Page 26
Removing the computer base, Prerequisites, Procedure
View all Dell Alienware 17 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removing the computer base NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1. Remove the base cover. 2. Remove the wireless card. 3. Remove the solid-state drive. 4. Remove the rear-I/O cover. Procedure 1. Note the cable routing and remove the antenna cables from the routing guides on the computer base. 2. Disconnect the tron-light cable from the system board. 3. Disconnect the tron-light cable from the system board. 4. Remove the two screws (M2.5x5) that secure the computer base to the palm-rest assembly. 5. Remove the 14 screws (M2.5x8) that secure the computer base to the palm-rest assembly. 26