Dell Alienware 17 R4 Service Manual - Page 30
Replacing the coin-cell battery, Procedure, Post-requisites
View all Dell Alienware 17 R4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Replacing the coin-cell battery NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1. Adhere the coin-cell battery to the palm-rest assembly. 2. Adhere the tape that secures the coin-cell battery to the palm-rest assembly. 3. Connect the coin-cell battery cable to the system board. 4. Route the coin-cell battery cable through the routing guide and adhere the tape that secures the coin-cell battery cable to the system board. Post-requisites 1. Replace the computer base. 2. Replace the rear-I/O cover. 3. Replace the solid-state drive. 4. Replace the wireless card. 5. Replace the base cover. 30