Dell Alienware 17 R5 Service Manual - Page 103
Removing the touchpad, Prerequisites, Procedure, After working inside your
View all Dell Alienware 17 R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Removing the touchpad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Follow the procedure from step 1 to step 4 in "Removing the hard drive". 3 Remove the wireless card. 4 Remove the solid-state drive. 5 Remove the rear-I/O cover. 6 Remove the computer base. 7 Remove the battery. Procedure 1 Open the latch, and disconnect the touchpad cable from the system board. 2 Open the latches, and disconnect the touchpad cable and the touchpad buttons cable from the touchpad. 3 Remove the five screws (M2x3) that secure the touchpad bracket to the palm-rest assembly. 103