Dell Alienware 17 R5 Service Manual - Page 62
Adhere the tape that secures the I/O-board cable to the I/O board.
View all Dell Alienware 17 R5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3 Using the alignment posts, place the I/O board on the palm-rest assembly and align the screw holes on the I/O board with the screw holes on the palmrest assembly. 4 Replace the two screws (M2.5x5) that secure the I/O board to the palm-rest assembly. 5 Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable. 6 Adhere the tape that secures the I/O-board cable to the I/O board. Post-requisites 1 Replace the computer base. 2 Replace the rear-I/O cover. 3 Replace the solid-state drive. 4 Replace the wireless card. 5 Follow the procedure from step 4 to step 7 in "Replacing the hard drive". 6 Replace the base cover. 62
3
Using the alignment posts, place the I/O board on the palm-rest assembly
and align the screw holes on the I/O board with the screw holes on the palm-
rest assembly.
4
Replace the two screws (M2.5x5) that secure the I/O board to the palm-rest
assembly.
5
Slide the I/O-board cable into the connector on the I/O board and close the
latch to secure the cable.
6
Adhere the tape that secures the I/O-board cable to the I/O board.
Post-requisites
1
Replace the
computer base
.
2
Replace the
rear-I/O cover
.
3
Replace the
solid-state drive
.
4
Replace the
wireless card
.
5
Follow the procedure from step 4 to step 7 in “
Replacing the hard drive
”.
6
Replace the
base cover
.
62