Dell Alienware M18x R2 Owner's Manual - Page 27
Replacing the Center Control Cover, Procedure, Postrequisites
View all Dell Alienware M18x R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
14 Replacing the Center Control Cover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Procedure 1 Slide the central control cover cable into the connector on the system board and press down on the connector latch to secure the cable. 2 Align the tabs on the center control cover with the slots on the palm-rest assembly and snap the center control cover into place. 3 Close the display and turn the computer over. 4 Replace the screws that secure the center control cover to the computer base. Postrequisites 1 Replace the base cover. See "Replacing the Base Cover" on page 15. 2 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 3 Follow the instructions in "After Working Inside Your Computer" on page 11. Replacing the Center Control Cover | 29