Dell Alienware M18x R2 Owner's Manual - Page 54
Replacing the Status-Light Board, Procedure, Postrequisites
View all Dell Alienware M18x R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
28 Replacing the Status-Light Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the slots on the status-light board with the alignment posts on the palm-rest assembly and secure the status-light board in place. 2 Replace the screw that secures the status-light board to the palm-rest assembly. 3 Route the status-light board cable through the routing guides on the palm-rest assembly. Postrequisites 1 Follow the instructions from step 2 to step 5 in Replacing the Palm Rest. 2 Replace the dispaly assembly. See "Replacing the Display Assembly" on page 48. 3 Replace the macro keyboard. See "Replacing the Macro Keyboard" on page 38. 4 Replace the keyboard. See "Replacing the Keyboard" on page 35. 5 Replace the center control cover. See "Replacing the Center Control Cover" on page 29. 6 Replace the base cover. See "Replacing the Base Cover" on page 15. 7 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 8 Follow the instructions in "After Working Inside Your Computer" on page 11. 56 | Replacing the Status-Light Board