Dell Alienware M18x R2 Owner's Manual - Page 46
Replacing the Display Assembly, Procedure, Postrequisites
View all Dell Alienware M18x R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
24 Replacing the Display Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Place the display assembly in position and replace the screws, on the display hinges, that secure the display assembly to the computer base. 2 Route the display cable and LED-logo board cable through the routing guides on the palm-rest assembly. 3 Connect the display cable, video-card connector cable, and LED-logo board cable to the respective connectors on the system board. 4 Slide the Mini-Card antenna cables through the slot on the computer base. 5 Close the display and turn the computer over. 6 Route the Mini-Card antenna cables through the routing guides on the computer base. 7 Connect the Mini-Card antenna cables to the Mini-Card. See "Replacing the Wireless Mini-Card" on page 91. 8 Turn the computer over. Postrequisites 1 Replace the macro keyboard. See "Replacing the Macro Keyboard" on page 38. 2 Replace the keyboard. See "Replacing the Keyboard" on page 35. 3 Replace the center control cover. See "Replacing the Center Control Cover" on page 29. 4 Replace the base cover. See "Replacing the Base Cover" on page 15. 5 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 6 Follow the instructions in "After Working Inside Your Computer" on page 11. 48 | Replacing the Display Assembly