Dell Alienware M18x R2 Owner's Manual - Page 29
Replacing the Power-Button Board, Procedure, Postrequisites
View all Dell Alienware M18x R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
16 Replacing the Power-Button Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/ regulatory_compliance. Procedure 1 Align the screws holes on the power-button board with the screw holes on the palmrest assembly. 2 Replace the screws that secure the power-button board to the palm-rest assembly. 3 Connect the power-button board cable to the system-board connector. Postrequisites 1 Replace the center control cover. See "Replacing the Center Control Cover" on page 29. 2 Replace the base cover. See "Replacing the Base Cover" on page 15. 3 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 4 Follow the instructions in "After Working Inside Your Computer" on page 11. Replacing the Power-Button Board | 31