Dell Alienware M18x R2 Owner's Manual - Page 60
Replacing the I/O Board, Procedure, Postrequisites
View all Dell Alienware M18x R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
32 Replacing the I/O Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the connectors on the I/O board with the slots on the computer base and gently press down on the I/O board. 2 Replace the screws that secure the I/O board to the computer base. 3 Slide the I/O board cable into the connector on the system board and press down on the connector latch to secure the cable. Postrequisites 1 Follow the instructions from step 2 to step 5 in Replacing the Palm Rest. 2 Replace the dispaly assembly. See "Replacing the Display Assembly" on page 48. 3 Replace the macro keyboard. See "Replacing the Macro Keyboard" on page 38. 4 Replace the keyboard. See "Replacing the Keyboard" on page 35. 5 Replace the center control cover. See "Replacing the Center Control Cover" on page 29. 6 Replace the base cover. See "Replacing the Base Cover" on page 15. 7 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 8 Replace any cards or blank that you removed from the Media-Card Reader. 9 Follow the instructions in "After Working Inside Your Computer" on page 11. 62 | Replacing the I/O Board