Dell Alienware M18x R2 Owner's Manual - Page 67
Replacing the Video-Card Heat-Sink Fan(s), Procedure, Postrequisites
View all Dell Alienware M18x R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
36 Replacing the Video-Card Heat-Sink Fan(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the video-card heat-sink fan(s) with the screw holes on the computer base. 2 Tighten the captive screws that secure the secondary video-card heat-sink fan to the computer base. 3 Tighten the captive screws that secure the primary video-card heat-sink fan to the computer base. 4 Route the primary video-card heat-sink fan cable through the routing guides on the computer base. 5 Connect the primary video-card heat-sink fan cable to the connector on the system board. 6 Connect the secondary video-card heat-sink fan cable to the connector on the system board. Postrequisites 1 Replace the base cover. See "Replacing the Base Cover" on page 15. 2 Replace the battery pack. See "Replacing the Battery Pack" on page 13. 3 Follow the instructions in "After Working Inside Your Computer" on page 11. Replacing the Video-Card Heat-Sink Fan(s) | 69