Dell Alienware m16 R1 Service Manual - Page 33
I/O board, Removing the I/O board
View all Dell Alienware m16 R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Steps 1. With the correct orientation, slide the rear I/O-cover into the palm-rest and keyboard assembly, and snap it into place. 2. Replace the five screws (M2x4) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 3. Connect the Tron-light cable to the system board. 4. Replace the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. I/O board Removing the I/O board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the wireless card. 5. Remove the 2230 solid-state drive in slot three and four. 6. Remove the 2280 solid state drive or 2230 solid-state drive in slot one and two, whichever applicable. 33