Dell Alienware m16 R1 Service Manual - Page 37
Power-adapter port, Removing the power-adapter port
![]() |
View all Dell Alienware m16 R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Using the alignment posts, place the left and right speakers into their slots on the palm-rest and keyboard assembly. NOTE: Ensure that the alignment posts are threaded through the rubber grommets on the speaker. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Adhere the tape that secures the speaker cable to the palm-rest and keyboard assembly. 4. Connect the speaker cable to the system board. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear-I/O cover. 4. Remove the top heat-sink. About this task The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal procedure. 37
![](/manual_guide/products/dell-alienware-m16-r1-service-manual-254db5c/37.png)