Dell Alienware m16 R1 Service Manual - Page 44
Steps, Next steps
![]() |
View all Dell Alienware m16 R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Steps 1. Route the antenna cables through the routing guides on the palm-rest and keyboard assembly. 2. Align the screw holes on the antenna holder with the screw holes on the display assembly. 3. Replace the four screws (M2.5x5) that secure the antenna holder to the display assembly. 4. Turn over the computer. Next steps 1. Follow the procedure from step 1 to step 8 in Installing the system board. NOTE: The system board can be removed and installed along with the fan and heat sink. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system board and heat sink. 2. Install the 2230 solid-state drive in slot three and four. 3. Install the 2280 solid-state drive or 2230 solid-state drive in slot one and two, whichever applicable. 4. Install the rear-I/O cover . 5. Install the small fan. 6. Install the top heat-sink 7. Install the wireless card. 8. Install the battery. 9. Install the base cover. 44
![](/manual_guide/products/dell-alienware-m16-r1-service-manual-254db5c/44.png)