Dell Alienware m16 R1 Service Manual - Page 9
Removing and installing components, Recommended tools, Screw list
View all Dell Alienware m16 R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2.5x8 (captive screw) Quantity 2 Screw image Base cover M2.5x5 6 2280 or 2230 solid-state drive M2x3.5 2 in SSD Slot one and two 2230 solid-state drive in SSD M2x3.5 2 Slot three and four Wireless-card bracket M2x2.5 2 Small fan M2x4 3 Rear I/O cover M2x4 5 Rear I/O cover M2.5x5 2 I/O board M2x2.5 4 Battery M2x3.5 4 9