Dell C1760NW Color Laser Printer User Guide - Page 99

Maintenance Chart Purpose: To print various charts that can be used for diagnosing your printer. Values: Ghost 4Colors Alignment Drum Refresh Click Start to print a chart to check for ghost printing. Click Start to print bands of yellow, magenta, cyan, and black with varying density. Click Start to print a chart, and then check for proper alignment of the print image on the paper. Click Start to print a chart to check the light fatigue of the drum cartridge. Reset Defaults Purpose: To initialize NVM (non-volatile memory) for system parameters. After executing this function and rebooting the printer, all the menu parameters, except the parameters for the network, are reset to their default values. Values: Reset Defaults and restart Click Start to initialize the system parameters. printer. Non-Dell Toner Purpose: To use toner cartridge of another manufacturer. NOTE: Using non-Dell-brand toner cartridges may make some printer features unusable, reduce print quality and decrease the reliability of your printer. Dell recommends only new Dell-brand toner cartridges for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell. NOTE: Before you use toner cartridge of another manufacturer, be sure to restart the printer. Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. NOTE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner. Dell™ Printer Configuration Web Tool 97