Dell Force10 S55T Quick Start Guide - Page 26

Use the untagged command to move untagged interfaces from the Default VLAN to another VLAN: Step Task Command Syntax 1 Access the interface vlan vlan-id INTERFACE VLAN mode of the VLAN to which you want to assign the interface. 2 Configure an interface untagged interface as untagged. This command is available only in VLAN interfaces. Command Mode CONFIGURATION INTERFACE Assign an IP address to a VLAN NOTE: An IP address cannot be assigned to the Default VLAN, which, by default, is VLAN 1. To assign another VLAN ID to the Default VLAN, use the default vlan-id vlan-id command. Task Command Syntax Configure an IP address and mask on ip address ip-address the interface. mask [secondary] Command Mode INTERFACE Connecting the Chassis to the Network Once you have completed the hardware installation and software configuration, you can connect to your company network by following your company's cabling requirements. 24 Installing the Software