Dell G3 3579 G3 15 Service Manual - Page 41
Replacing the touchpad, Procedure, Post-requisites
View all Dell G3 3579 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
22 Replacing the touchpad WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure NOTE: Ensure that the touchpad is aligned with the guides available on the palm-rest and keyboard assembly, and the gap on either sides of the touchpad is equal. 1 Slide and place the touchpad into the slot on the palm rest and keyboard assembly. 2 Replace the four screws (M2x2) that secure the touchpad to the palm rest and keyboard assembly. 3 Adhere the tape that secures the touchpad to the palm rest and keyboard assembly. 4 Slide the touchpad cable into the connector on the system board and close the latch. Post-requisites 1 Replace the battery. 2 Replace the base cover. Replacing the touchpad 41