Dell G3 3579 G3 15 Service Manual - Page 55
Replacing the I/O board, Procedure, Post-requisites
View all Dell G3 3579 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
32 Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Connect the I/O-board cable to the I/O board and close the latch. 2 Turn over the I/O board. 3 Using the alignment posts, place the I/O board on the palm rest and keyboard assembly. 4 Replace the two screws (M2.5x2.5) that secure the I/O board to the palm rest and keyboard assembly. 5 Connect the power-button board cable to the system board and close the latch. Post-requisites Replace the base cover. Replacing the I/O board 55