Dell G3 3579 G3 15 Service Manual - Page 46
Removing the heat sink, Prerequisites, Procedure, time for the heat sink to cool before
![]() |
View all Dell G3 3579 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
27 Removing the heat sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. WARNING: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. Prerequisites Remove the base cover. Procedure 1 Remove the four (M2x3) screws in the reverse sequential order (8>7>6>5) that secure the heat sink to the system board. 2 In the reverse sequential order (4>3>2>1), loosen the four captive screws that secure the heat sink to the system board. 3 Lift the heat sink off the system board. 46 Removing the heat sink
![](/manual_guide/products/dell-g3-3579-g3-15-service-manual-f979a2e/46.png)