Dell G3 3579 G3 15 Service Manual - Page 48
Removing the display assembly, Prerequisites, Procedure
![]() |
View all Dell G3 3579 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
29 Removing the display assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Prerequisites 1 Remove the base cover. 2 Remove the wireless card. Procedure 1 Open the latch and disconnect the display cable from the system board. 2 Note the routing of the display cable and remove the cable from its routing guides on the fan and palm rest and keyboard assembly. 3 Remove the six screws (M2.5x6) that secure the left and right hinges to the system board and palm rest and keyboard assembly. 4 Open the hinges. 48 Removing the display assembly
![](/manual_guide/products/dell-g3-3579-g3-15-service-manual-f979a2e/48.png)