Dell G3 3579 G3 15 Service Manual - Page 66
Removing the power button with fingerprint reader, Prerequisites, Procedure, fingerprint
![]() |
View all Dell G3 3579 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
37 Removing the power button with fingerprint reader WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: Applicable only for computers that are shipped with fingerprint reader. Prerequisites 1 Remove the base cover. 2 Remove the battery. 3 Remove the solid-state drive/Intel Optane. 4 Remove the fan. 5 Remove the heat sink. 6 Remove the wireless card. 7 Remove the power-button board. 8 Remove the system board. 9 Remove the display assembly. Procedure 1 Peel the fingerprint reader cable off the palm rest and keyboard assembly. 2 Remove the screw (M2x2) that secures the power button to the palm rest and keyboard assembly. 3 Using a plastic scribe, release the fingerprint-reader board from the palm rest and keyboard assembly. 4 Lift the power button, along with its cable, off the palm rest and keyboard assembly. 66 Removing the power button with fingerprint reader
![](/manual_guide/products/dell-g3-3579-g3-15-service-manual-f979a2e/66.png)