Dell GX280DT User Guide - Page 11

Password Status This option locks the system password field with the admin password. When the field is locked, the option to disable password security by pressing when the computer starts is no longer available. Chassis Intrusion When installed and enabled, this option alerts the user, during the next computer start-up, that the computer cover has been opened. The settings are On, On-Silent (default), and Off. Intrusion Status This option appears in system setup only if a chassis intrusion event occurred. The settings are Clear and Detected (default). Select Clear to clear the chassis intrusion status Power Management AC Recovery Determines what happens when AC power is restored to the computer. Sets time and days of week to automatically turn on the computer. Choices are Everyday or Auto Power Weekdays. The default setting is On Off. This feature does not work if you turn off your computer using a power strip or surge protector. Auto Power Time Sets the specific time to automatically turn on the computer. Time is kept in a 24hour format (hours:minutes). Change the start-up time by pressing the right- or left-arrow key to increase or decrease the numbers, or type numbers in both the date and time fields. Use this setting in conjunction with the Auto Power On setting. Low Power Mode When Low Power Mode is selected, remote wakeup events no longer power up from Hibernate or Off unless an additional NIC card is installed. NOTE: This setting affects only the integrated network controller. This option allows the system to power up when a Network Interface Controller or