Dell Inspiron 13 N3010 Service Manual - Page 10

Replacing the Camera Module

Page 10 highlights

13. Lift the camera module off the display cover. Replacing the Camera Module 1. Follow the instructions in Before You Begin. 2. Connect the display cable to the connector on the camera module. 3. Replace the tape that secures the display cable to the camera module. 4. Place the camera module in position and replace the two screws that secure the camera module to the display cover. 5. Replace the display panel (see Replacing the Display Panel). 6. Replace the display bezel (see Replacing the Display Bezel). 7. Replace the display assembly (see Replacing the Display Assembly). 8. Replace the palm rest assembly (see Replacing the Palm Rest Assembly). 9. Replace the keyboard (see Replacing the Keyboard). 10. Replace the memory module(s) (see Replacing the Memory Module(s)). 11. Replace the memory-module cover (see Replacing the Memory-Module Cover). 12. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

13.
Lift the camera module off the display cover.
Replacing the Camera Module
1.
Follow the instructions in
Before You Begin
.
2.
Connect the display cable to the connector on the camera module.
3.
Replace the tape that secures the display cable to the camera module.
4.
Place the camera module in position and replace the two screws that secure the camera module to the display cover.
5.
Replace the display panel (see
Replacing the Display Panel
).
6.
Replace the display bezel (see
Replacing the Display Bezel
).
7.
Replace the display assembly (see
Replacing the Display Assembly
).
8.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
11.
Replace the memory-module cover (see
Replacing the Memory
-
Module Cover
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.