Dell Inspiron 13 N3010 Service Manual - Page 21

Display Panel Bracket

Page 21 highlights

1 screws (6) 2 display panel 5. Lift the display panel off the display cover. 6. Remove the display cable (see Removing the Display Cable). Replacing the Display Panel 1. Follow the instructions in Before You Begin. 2. Replace the display cable (see Replacing the Display Cable). 3. Align the display panel with the display cover 4. Replace the six screws that secure the display panel to the display cover. 5. Replace the display bezel (see Replacing the Display Bezel). 6. Replace the display assembly (see Replacing the Display Assembly). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Display Panel Bracket Removing the Display Panel Bracket 1. Follow the instructions in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the display panel (see Removing the Display Panel). 5. Remove the four screws (two on each side) that secure the display panel brackets to the display panel.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

5.
Lift the display panel off the display cover.
6.
Remove the display cable (see
Removing the Display Cable
).
Replacing the Display Panel
1.
Follow the instructions in
Before You Begin
.
2.
Replace the display cable (see
Replacing the Display Cable
).
3.
Align the display panel with the display cover
4.
Replace the six screws that secure the display panel to the display cover.
5.
Replace the display bezel (see
Replacing the Display Bezel
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
Display Panel Bracket
Removing the Display Panel Bracket
1.
Follow the instructions in
Before You Begin
.
2.
Remove the display assembly (see
Removing the Display Assembly
).
3.
Remove the display bezel (see
Removing the Display Bezel
).
4.
Remove the display panel (see
Removing the Display Panel
).
5.
Remove the four screws (two on each side) that secure the display panel brackets to the display panel.
1
screws (6)
2
display panel
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.