Dell Inspiron 13 N3010 Service Manual - Page 39

Back to Contents Page Power Button Board Dell™ Inspiron™ N3010 Service Manual Removing the Power Button Board Replacing the Power Button Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the Power Button Board 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the memory-module cover (see Removing the Memory-Module Cover). 4. Remove the memory module(s) (see Removing the Memory Module(s)). 5. Remove the keyboard (see Removing the Keyboard). 6. Remove the palm rest assembly (see Removing the Palm Rest Assembly). 7. Turn the palm rest assembly over and remove the two screws that secure the power button board to the palm rest assembly. 1 power button board 2 screws (2) 8. Lift the power button board off the palm rest assembly. Replacing the Power Button Board 1. Follow the instructions in Before You Begin. 2. Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly. 3. Turn the palm rest assembly over. 4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).