Dell Inspiron 1520 View - Page 167
Replacing the DIMM B Memory Module, Remove the module from the connector.
View all Dell Inspiron 1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
3 Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. 4 Remove the module from the connector. 1 2 1 securing clips (2) 2 memory module Replacing the DIMM B Memory Module NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1 Align the notch in the module edge connector with the tab in the connector slot. 2 Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure. Adding and Replacing Parts 167