Dell Inspiron 16 5630 Service Manual - Page 15
Installing the base cover, Steps, Prerequisites, About this task
![]() |
View all Dell Inspiron 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Steps 1. Remove the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the two captive screws that secure the base cover to the palm-rest and keyboard assembly. 3. Using a plastic scribe, pry the base cover from the top left and continue to work on the sides to open the base cover. 4. Lift and slide the base cover off the palm-rest assembly. 5. Peel the tape that secures the battery cable to the battery 6. Disconnect the battery cable Installing the base cover Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task NOTE: The following image(s) shows the base cover and provides a visual representation of the installation procedure. Removing and installing components 15
![](/manual_guide/products/dell-inspiron-16-5630-service-manual-1fb1a5c/15.png)