Dell Inspiron 16 5630 Service Manual - Page 26
Removing the M.2 2280 solid-state drive, Steps, Next steps, Prerequisites
![]() |
View all Dell Inspiron 16 5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Steps 1. With the printed side of the solid-state drive facing up, align the screw hole on the M.2 2230 solid-state drive with the screw hole on the M.2 solid-state drive bracket. 2. Secure the M.2 2230 solid-state drive to the M.2 solid-state drive bracket with a M2x1.8 screw. 3. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot. 4. Gently slide the M.2 2230 solid-state drive with bracket into the solid-state drive slot. 5. Replace the M2x3 screw to secure the M.2 solid-state drive with bracket to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 26 Removing and installing components
![](/manual_guide/products/dell-inspiron-16-5630-service-manual-1fb1a5c/26.png)