Dell Inspiron 16 7610 Service Manual for computers with three fans - Page 37

Fans, Removing the left fan

Get Dell Inspiron 16 7610 PDF manuals and user guides View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

6. Connect the power-button board cable to the connector on the I/O board and close the latch. 7. Connect the power-button with fingerprint-reader cable to the connector on the I/O board and close the latch. NOTE: This step is only applicable for computers shipped with the optional fingerprint reader. 8. Connect the coin-cell battery cable to the I/O board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Fans Removing the left fan Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image(s) indicate the location of the left fan and provides a visual representation of the removal procedure. Steps 1. Lift the corner of the Mylar that covers the system board. 2. Disconnect the left-fan cable from the system board. 3. Remove the five screws (M2x5) that secure the right fan to the palm-rest and keyboard assembly. 4. Lift the left fan at an angle till the left fan disengages from the slot on the palm-rest and keyboard assembly. Removing and installing components 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
6.
Connect the power-button board cable to the connector on the I/O board and close the latch.
7.
Connect the power-button with fingerprint-reader cable to the connector on the I/O board and close the latch.
NOTE:
This step is only applicable for computers shipped with the optional fingerprint reader.
8.
Connect the coin-cell battery cable to the I/O board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Fans
Removing the left fan
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
About this task
The following image(s) indicate the location of the left fan and provides a visual representation of the removal procedure.
Steps
1.
Lift the corner of the Mylar that covers the system board.
2.
Disconnect the left-fan cable from the system board.
3.
Remove the five screws (M2x5) that secure the right fan to the palm-rest and keyboard assembly.
4.
Lift the left fan at an angle till the left fan disengages from the slot on the palm-rest and keyboard assembly.
Removing and installing components
37