Dell Inspiron 16 7610 Service Manual for computers with three fans - Page 44

Power-button board, Removing the power-button board

Get Dell Inspiron 16 7610 PDF manuals and user guides View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Steps 1. Connect the power-adapter port cable to the system board. 2. Adhere the tape that covers the power-adapter port connector on the system board. 3. Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly. 4. Place the power-adapter port into the slot on the palm-rest and keyboard assembly. 5. Close the right-display hinge and align the screw holes on the right-display hinge with the screw holes on the system board. 6. Replace the three screws (M2.5x5) that secures the right-display hinge to the system board. Next steps 1. Install the heat sink. 2. Install the left fan. 3. Install the base cover. 4. Exit Service Mode. 5. Follow the procedure in After working inside your computer. Power-button board Removing the power-button board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 44 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Steps
1.
Connect the power-adapter port cable to the system board.
2.
Adhere the tape that covers the power-adapter port connector on the system board.
3.
Route the power-adapter port cable through the routing guides on the palm-rest and keyboard assembly.
4.
Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
5.
Close the right-display hinge and align the screw holes on the right-display hinge with the screw holes on the system board.
6.
Replace the three screws (M2.5x5) that secures the right-display hinge to the system board.
Next steps
1.
Install the
heat sink
.
2.
Install the
left fan
.
3.
Install the
base cover
.
4.
Exit
Service Mode
.
5.
Follow the procedure in
After working inside your computer
.
Power-button board
Removing the power-button board
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
44
Removing and installing components