Dell Inspiron 3200 Service Manual - Page 102

LCD-to-inverter cable from inverter-board connector CN2 on the side of

Get Dell Inspiron 3200 PDF manuals and user guides View all Dell Inspiron 3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 102 highlights

3. Remove the LCD panel. NOTE: Be careful when removing any part of the LCD cable harness. Lift up the LCD panel, and disconnect the LCD cable harness from connector J1 on the back of the LCD panel (for an IBM panel, hold the cable ground strap in place with one hand and peel back the EMI tape covering that holds the ground strap in place on the cable). Disconnect the LCD-to-inverter cable from inverter-board connector CN2 on the side of the inverter board next to the back cover (see Figure 4-47). CAUTION: When reinstalling an IBM LCD cable, slide the cable underneath the ground strap in place and reapply the EMI tape. 4. Remove grounding screw GS1 from the bracket. 4-66 Dell Inspiron 3000 Series Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
4-66
Dell Inspiron 3000 Series Service Manual
3.
Remove the LCD panel.
NOTE: Be careful when removing any part of the LCD cable harness.
Lift up the LCD panel, and disconnect the LCD cable harness from connec-
tor J1 on the back of the LCD panel (for an IBM panel, hold the cable
ground strap in place with one hand and peel back the EMI tape covering
that holds the ground strap in place on the cable). Disconnect the
LCD-to-inverter cable from inverter-board connector CN2 on the side of the
inverter board next to the back cover (see Figure 4-47).
4.
Remove grounding screw GS1 from the bracket.
CAUTION: When reinstalling an IBM LCD cable, slide the cable
underneath the ground strap in place and reapply the EMI tape.