Dell Inspiron 3200 Service Manual - Page 38
Screw Identification and Tightening, Screw Identification Example
View all Dell Inspiron 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
• Small scribe (or Delrin [plastic] screwdriver) • Nut drivers (4 mm and 5 mm) Screw Identification and Tightening . B1 (screw B1 is 12 mm) 12 mm Figure 4-2. Screw Identification (Example) CAUTION: It is essential that the correct length screw be used when reinstalling a screw. Otherwise, hardware damage could result. Make sure that the screw is properly aligned with its corresponding hole, and avoid overtightening. Where applicable, information about screw lengths is provided in illustrations. Before installing a screw, match the screw to the screw length graphics provided to check for correct length. 4-2 Dell Inspiron 3000 Series Service Manual
4-2
Dell Inspiron 3000 Series Service Manual
•
Small scribe (or Delrin [plastic] screwdriver)
•
Nut drivers (4 mm and 5 mm)
S
crew Identification and Tightening
.
Figure 4-2.
Screw Identification (Example)
Where applicable, information about screw lengths is provided in illustrations.
Before installing a screw, match the screw to the screw length graphics provided
to check for correct length.
CAUTION: It is essential that the correct length screw be used when
reinstalling a screw. Otherwise, hardware damage could result. Make
sure that the screw is properly aligned with its corresponding hole, and
avoid overtightening.
B1
(screw B1 is 12 mm)
12 mm