Dell Inspiron Mini 12 1210 Inspiron Mini 12 Service Manual - Page 33

Back to Contents Page Replacing the Power Button Board Dell™ Inspiron™ 1210 Service Manual CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1. Follow the instructions in Before You Begin. 2. Remove the palm rest. See Replacing the Palm Rest. 1 M2.5x3-mm screw 3 power button cable 2 power button board 3. Turn the palm rest over and remove the M2.5x3-mm screw that secures the power button board to the palm rest. 4. Lift the power button board off the palm rest. 5. To replace the Power Button Board, insert the power button board into the tabs and tighten the M2.5x3-mm screw. 6. Replace the palm rest. See Replacing the Palm Rest. 7. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position. Back to Contents Page