Dell Inspiron Mini 12 1210 Inspiron Mini 12 Service Manual - Page 6

Replacing the Internal Card With Bluetooth, Wireless Technology

Page 6 highlights

Back to Contents Page Replacing the Internal Card With Bluetooth® Wireless Technology Dell™ Inspiron™ 1210 Service Manual CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). If you ordered a card with Bluetooth wireless technology with your computer, it is already installed. 1. Follow the instructions in Before You Begin. 2. Remove the palm rest. See Replacing the Palm Rest. 3. Turn the palm rest over. 1 bluetooth card cable 3 securing tabs 2 bluetooth card 4. Pry the card out of the securing tabs that hold the card to the palm rest. 5. Lift the card out of the palm rest. 6. To replace the card, snap the card into its place on the palm rest. 7. Replace the palm rest. See Replacing the Palm Rest. 8. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Back to Contents Page
Replacing the Internal Card With Bluetooth
®
Wireless Technology
Dell™ Inspiron™ 1210 Service Manual
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
1.
Follow the instructions in
Before You Begin
.
2.
Remove the palm rest. See
Replacing the Palm Rest
.
3.
Turn the palm rest over.
4.
Pry the card out of the securing tabs that hold the card to the palm rest.
5.
Lift the card out of the palm rest.
6.
To replace the card, snap the card into its place on the palm rest.
7.
Replace the palm rest. See
Replacing the Palm Rest
.
8.
Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
bluetooth card cable
2
bluetooth card
3
securing tabs