Dell Inspiron Mini 12 1210 Inspiron Mini 12 Service Manual - Page 34

Replacing the Speaker

Page 34 highlights

Back to Contents Page Replacing the Speaker Dell™ Inspiron™ 1210 Service Manual CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in Before You Begin. 2. Remove the palm rest. See Replacing the Palm Rest. 1 M2x4-mm screw (2) 3 speaker cable 2 speaker 3. Turn the palm rest over. 4. Remove the two speaker M2x4-mm screws from the palm rest. 5. Make note of the speaker cable routing. 6. Remove the speaker. 7. To replace the speaker, replace the speaker and route the speaker cable through the guide. 8. Replace the two speaker M2x4-mm screws that secure the speaker to the palm rest. 9. Replace the palm rest (see Replacing the Palm Rest). 10. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

Back to Contents Page
Replacing the Speaker
Dell™ Inspiron™ 1210 Service Manual
1.
Follow the instructions in
Before You Begin
.
2.
Remove the palm rest. See
Replacing the Palm Rest
.
3.
Turn the palm rest over.
4.
Remove the two speaker M2x4-mm screws from the palm rest.
5.
Make note of the speaker cable routing.
6.
Remove the speaker.
7.
To replace the speaker, replace the speaker and route the speaker cable through the guide.
8.
Replace the two speaker M2x4-mm screws that secure the speaker to the palm rest.
9.
Replace the palm rest (see
Replacing the Palm Rest
).
10.
Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2x4-mm screw (2)
2
speaker
3
speaker cable