Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 67
About this task, Steps, Next steps, Installing the internal battery
![]() |
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
About this task The following images indicate the location of the internal battery and provide a visual representation of the installation procedure. Figure 57. Installing the internal battery Steps 1. Place the internal battery, along with the battery cable, in the slot on the back-cover assembly. 2. Align the screw holes on the internal battery to the screw holes on the base-cover assembly. 3. Replace the four screws (M2x6) to secure the internal battery to the base-cover assembly. 4. Place the three battery-support brackets in the slot on the back-cover assembly. 5. Align the screw holes on the battery-support brackets with the screw holes on the base-cover assembly. 6. Replace the six screws (M2x3) to secure the bracket-support brackets to the base-cover assembly. Next steps 1. Install the back-cover assembly. 2. Install the handle, if applicable. 3. Install the stylus. 4. Follow the procedure in After working inside your tablet. Removing and installing Field Replaceable Units (FRUs) 67
![](/manual_guide/products/dell-latitude-7030-rugged-extreme-tablet-owners-manual-8ed18c1/67.png)