Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 98
Removing the fan and heat-sink assembly
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Figure 83. Removing the fan and heat-sink assembly Steps 1. Loosen the captive screw that secures the wireless-card bracket to the wireless card. 2. Lift the wireless-card bracket off the wireless card. 3. Peel back the tape that secures the fan cable to the system-board shielding cover. 4. Peel back the tape that secures the display cable to the system-board shielding cover. 5. Using a plastic scribe, release the system-board shielding cover starting from the release point near the fan-cable connector, on the top side of the tablet. Continue working along the bottom side of the system-board shielding cover. NOTE: The wireless-card thermal plate is permanently attached to the system-board shielding cover. Any replacement of the wireless card requires removal of the system-board shielding cover along with the wireless-card thermal plate. 98 Removing and installing Field Replaceable Units (FRUs)