Dell Latitude 7340 Service Manual - Page 10
Removing and installing components, Recommended tools, Screw list
View all Dell Latitude 7340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 Removing and installing components NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Recommended tools The procedures in this document may require the following tools: ● Phillips screwdriver #0 ● Phillips screwdriver #1 ● Plastic scribe Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type Captive screw Quantity 8 Screw image WWAN card M2x3 0 M.2 SSD shielding cover M2x3 1 Solid-state drive M2x4 1 WWAN bracket 2-cell battery 3-cell battery Fan M2x3 1 Captive screw 4 M2x4 1 Captive screw 4 M2x4 1 M2x4 1 Heat-sink Captive screw 4 10 Removing and installing components