Dell Latitude 7340 Service Manual - Page 28

Battery cable, Removing the battery cable

Get Dell Latitude 7340 PDF manuals and user guides View all Dell Latitude 7340 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Steps 1. Place the 3-cell battery along with the battery cable on the palm-rest and keyboard assembly. 2. Adhere the tape to secure the battery cable to the battery. 3. Align the screw holes on the 3-cell battery to the screw holes on the palm-rest and keyboard assembly. 4. Tighten the five captive screws to secure the 3-cell battery to the palm-rest and keyboard assembly. 5. Connect the battery cable to the connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Battery cable Removing the battery cable Prerequisites 1. Follow the procedure in After working inside your computer. 2. Remove the base cover. 3. Remove the 2-cell battery or the3-cell battery, whichever is applicable. NOTE: If battery is disconnected from system board for service, then there is a delay during system boot as the system undergoes RTC battery reset. About this task The following images indicate the location of the battery cable and provide a visual representation of the removal procedure. 28 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Steps
1.
Place the 3-cell battery along with the battery cable on the palm-rest and keyboard assembly.
2.
Adhere the tape to secure the battery cable to the battery.
3.
Align the screw holes on the 3-cell battery to the screw holes on the palm-rest and keyboard assembly.
4.
Tighten the five captive screws to secure the 3-cell battery to the palm-rest and keyboard assembly.
5.
Connect the battery cable to the connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Battery cable
Removing the battery cable
Prerequisites
1.
Follow the procedure in
After working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
2-cell battery
or the
3-cell battery
, whichever is applicable.
NOTE:
If battery is disconnected from system board for service, then there is a delay during system boot as the system
undergoes RTC battery reset.
About this task
The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.
28
Removing and installing components