Dell N3200-ON PowerSwitch N3200-ON/E3200-ON Series Installation Guide - Page 24
Storing components
![]() |
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
CAUTION: On an AC switch, use the power cable as the main disconnect device. Ensure that the socket-outlet is located and installed near the equipment and is accessible. NOTE: Software controls the module power. You do not see module LEDs when the switch powers up in ONIE. Storing components If you do not install your N3200-ON/E3200-ON Series switch and components immediately, properly store the switch and all components using these guidelines: ● Storage location temperature must remain constant. The storage range is from -40°C to 70°C (-40° to 158°F). ● Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts. ● Store in a dust-free environment. NOTE: ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground strap when handling the N3200-ON/E3200-ON Series switch and accessories. After you remove the original packaging, place the N3200-ON/E3200-ON Series switch and components on an antistatic surface. 24 Site preparations
![](/manual_guide/products/dell-powerswitch-n3248teon-powerswitch-n3200one3200on-series-installation-guide-fd50d94/24.png)