Dell N3200-ON PowerSwitch N3200-ON/E3200-ON Series Installation Guide - Page 36
Wall mount, Screw the remaining four M5 screws into the anchors and tighten the screws.
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
7. Screw one M5 screw on each corner, four screws total, into the anchors, leaving approximately 5 mm (0.20 in) gap between the anchor and the screw. 8. Slide the switch onto the screws and tighten the screws to secure the switch in place. Torque the screws to 24 in-lbs. Wall mount 9. Screw the remaining four M5 screws into the anchors and tighten the screws. Torque the screws to 24 in-lbs. Wall mount 36 N3200-ON/E3200-ON Series switch installation
7.
Screw one M5 screw on each corner, four screws total, into the anchors, leaving approximately 5 mm (0.20 in) gap between
the anchor and the screw.
8.
Slide the switch onto the screws and tighten the screws to secure the switch in place.
Torque the screws to 24 in-lbs.
Wall mount
9.
Screw the remaining four M5 screws into the anchors and tighten the screws.
Torque the screws to 24 in-lbs.
Wall mount
36
N3200-ON/E3200-ON Series switch installation