Dell N3200-ON PowerSwitch N3200-ON/E3200-ON Series Installation Guide - Page 48
DIN rail installation
![]() |
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
DIN rail installation To install an external power adapter to DIN rails: NOTE: This installation instruction procedure applies to the external power adapter only. You must order the mounting supplies for this installation separately. 1. Remove the two DIN buckles and screws from the shipping box. 2. Install the EPA in the power adapter holder using Steps 1 through 3 in the Power adapter holder assembly section. 3. Fix the two DIN buckles to the bottom side of the EPA power adapter assembly using three screws for each DIN rail. 4. Snap the two DIN buckles into the DIN rails. 5. Install the AC power cable to the EPA and secure with the wire clip. 6. Bend the AC power cable 180 degrees along the holder wall and through the cable cutout. 48 External power adapter
![](/manual_guide/products/dell-powerswitch-n3248teon-powerswitch-n3200one3200on-series-installation-guide-fd50d94/48.png)