Dell N3200-ON PowerSwitch N3200-ON/E3200-ON Series Installation Guide - Page 73
USB storage mount
![]() |
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
NOTE: Before starting this procedure, be sure that you have a terminal emulation program that is already installed on your computer. If your computer requires non-Dell drivers, and you have issues with your USB console port, contact Dell technical support for assistance. 1. Start up the computer. 2. Connect the USB Type-A end of cable into an available USB port on the computer. 3. Connect the microUSB Type-B end of cable into the microUSB Type-B console port on the switch. 4. Start up the switch. 5. Install the necessary USB device drivers. 6. Open your terminal software emulation program to access the switch. 7. Confirm that the terminal settings on your terminal software emulation program are as follows: ● 115200 baud rate ● No parity ● Eight data bits ● One stop bit ● No flow control USB storage mount USB storage does not automatically mount. USB storage supports the FAT file system. To use USB storage, first mount the device using the following steps: 1. Start up the switch. 2. Press Enter on the ONIE rescue mode menu option from the ONIE Grub boot loader. 3. Create a mount directory for the USB storage. ONIE:/ # mkdir /mnt/usb 4. View the fixed disks using the fdisk command. ONIE:/mnt # fdisk -l For internal storage Disk /dev/sda: 15.8 GB, 15829303296 bytes 255 heads, 63 sectors/track, 1924 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot /dev/sda1 Start 1 End 1925 Blocks Id System 15458303+ ee EFI GPT For USB storage Disk /dev/sdb: 30.9 GB, 30942946304 bytes 64 heads, 32 sectors/track, 29509 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Device Boot Start End Blocks Id System 5. Mount the device /dev/sdb to the /mnt/usb directory. ONIE:/ # mount -t vfat /dev/sdb /mnt/usb NOTE: If the /mnt/usb directory is missing, the following message displays: mount: mounting /dev/ sdb on /mnt/usb failed: No such file or directory. NOTE: If the USB device is not seen, the following message displays: mount: mounting /dev/sdb on /mnt/usb failed: No such device or address. Management ports 73
![](/manual_guide/products/dell-powerswitch-n3248teon-powerswitch-n3200one3200on-series-installation-guide-fd50d94/73.png)