Dell N3200-ON PowerSwitch N3200-ON/E3200-ON Series Installation Guide - Page 50
Face the L-bracket flange towards the rear of the assembly.
![]() |
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2. Align the two mushroom heads on the switch with the two holes on the power adapter holder. Slide the power adapter holder forward to lock it in place. 3. Use two screws to secure the power adapter holder to the side of the switch. 4. Install the AC power cable to the EPA and secure with the wire clip. 5. Bend the AC power cable 180 degrees along the holder wall and through the cable cutout. 6. Align the L-bracket with mushroom head on the switch and the power adapter holder. Face the L-bracket flange towards the rear of the assembly. 7. Secure the L-brackets to the switch and the power adapter holder using four screws on each side. 8. Install the L-bracket to the two-post rack, and secure it with the rack-mounting screws. 50 External power adapter
![](/manual_guide/products/dell-powerswitch-n3248teon-powerswitch-n3200one3200on-series-installation-guide-fd50d94/50.png)