Dell N3200-ON PowerSwitch N3200-ON/E3200-ON Series Installation Guide - Page 57
Power supply, Topics
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
6 Power supply The N3200-ON/E3200-ON Series switch ships with one pluggable AC power supply. You can order a second AC PSU separately. If you require DC power, you can order one or two DC PSUs. The N3224PX-ON, N3248P-ON/E3248P-ON, and N3248PXE-ON/E3248PXE-ON switches also support an optional external power supply that connects to the switch using an MPS-1S or MPS-3S shelf. Use the EPS to add redundancy, or extend the PoE budget that is based on your requirement. To install an external power supply, see the External Power Supply (EPS) Installation for the Dell PowerSwitch N2200-ON and N3200-ON/E3200-ON Series Switches at www.dell.com/support. Table 11. AC PSU input voltage AC PSU Input voltage Output DPS-320AP (For N3208PX-ON only) ● Low line = 110 V ● High line = 220 V ● 300 W ● 300 W DPS-550 ● Low line = 110 V ● High line = 220 V ● 550 W ● 550 W DPS-1050 ● Low line = 110 V ● High line = 220 V ● 950 W ● 1050 W DPS-1600 ● Low line = 110 V ● High line = 220 V ● 950 W ● 1600 W Table 12. DC PSU input voltage DC PSU DPS-550 DPS-1300 Input voltage ● -40 V to -60 V ● -40 V to -60 V Output ● 550 W ● 1300 W CAUTION: To prevent electrical shock, ensure that the N3200-ON/E3200-ON Series switch is grounded properly. If you do not ground your equipment correctly, excessive emissions may result. Use a qualified electrician to ensure that the power cables meet your local electrical requirements. WARNING: Equipment that provides DC input to the DC port must be certified for CCC and meet the relevant standards. NOTE: Reserve airflow, from the PSU-side to the I/O-side of the switch, is only supported on the N3224T-ON, N3248XON, and N3248TE-ON switches. NOTE: Connect the power supply to the appropriate branch circuit protection as defined by your local electrical codes. Verify that the remote power source complies with the switch input power specifications. NOTE: ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground strap when handling the N3200-ON/E3200-ON Series switch and components. Topics: • Components • AC or DC power supply installation • AC or DC power supply replacement • 550W DC power connections • 1300W DC power connections • Connect the EPS shelf Power supply 57