Dell OptiPlex 7070 Tower Service Manual - Page 26
-inch hard drive, Removing 3.5–inch hard drive from the hard drive bracket
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3.5-inch hard drive Removing 3.5-inch hard drive from the hard drive bracket 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel c. 3.5-inch HDD assembly 3. To remove the hard drive : a. Pull one side of the hard drive bracket to disengage the pins on the bracket from the slots on the hard drive [1]. b. Lift the hard drive out of the hard drive bracket [2]. Installing the 3.5-inch hard drive into the hard drive bracket 1. To install the hard drive: a. Align the hard drive to the side of the hard drive bracket, and pull the other end tabs to insert the pins on the bracket into the hard drive [1]. b. Insert the hard drive into the hard drive bracket until it clicks into place [2]. 2. Install the: a. 3.5-inch hard drive assembly b. Front bezel c. Side cover 3. Follow the procedure in After working inside your computer. 26 Removing and installing components