Dell OptiPlex 7070 Tower Service Manual - Page 63
Installing optional VGA module
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
b. Disconnect the VGA cable from the connector on the system board [1]. c. Remove the VGA module from the system [2]. Installing optional VGA module 1. To remove the metal bracket as shown below, insert a flathead screwdriver in the hole of the bracket [1], push the bracket to release the bracket [2], and then lift the bracket out from the system. 2. Insert the VGA module into its slot from the inside of your computer [1] and connect the VGA cable to the connector on the system board [2]. Removing and installing components 63
b.
Disconnect the VGA cable from the connector on the system board [1].
c.
Remove the VGA module from the system [2].
Installing optional VGA module
1.
To remove the metal bracket as shown below, insert a flathead screwdriver in the hole of the bracket [1], push the bracket
to release the bracket [2], and then lift the bracket out from the system.
2.
Insert the VGA module into its slot from the inside of your computer [1] and connect the VGA cable to the connector on the
system board [2].
Removing and installing components
63