Dell OptiPlex 7070 Tower Service Manual - Page 40
Installing PCIe expansion card, from your computer.
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5. Repeat the steps to remove any additional PCIe expansion card. Installing PCIe expansion card 1. To install the PCIe expansion card: a. NOTE: To remove the PCIe brackets (2 and 3), push the bracket upwards from the inside of your computer to release it and then lift the bracket away from your computer. Insert a screwdriver in the hole of a PCIe bracket and push hard to release the bracket [3], and then lift the bracket out from your computer. b. Insert the PCIe expansion card to the connector on the system board [1]. c. Secure the PCIe expansion card by pushing the card retention latch until it clicks into place [2]. d. Repeat the steps to install any additional PCIe expansion card. 40 Removing and installing components
5.
Repeat the steps to remove any additional PCIe expansion card.
Installing PCIe expansion card
1.
To install the PCIe expansion card:
a.
NOTE:
To remove the PCIe brackets (2 and 3), push the bracket upwards from the inside of your computer to
release it and then lift the bracket away from your computer.
Insert a screwdriver in the hole of a PCIe bracket and push hard to release the bracket [3], and then lift the bracket out
from your computer.
b.
Insert the PCIe expansion card to the connector on the system board [1].
c.
Secure the PCIe expansion card by pushing the card retention latch until it clicks into place [2].
d.
Repeat the steps to install any additional PCIe expansion card.
40
Removing and installing components