Dell OptiPlex 7070 Tower Service Manual - Page 28
-inch hard drive, Removing the 2.5–inch drive from the drive bracket, front panel door
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2. Close the front panel door. 3. Install the: a. Front bezel b. Side cover 4. Follow the procedure in After Working Inside Your Computer. 2.5-inch hard drive Removing the 2.5-inch drive from the drive bracket 1. Follow the procedure in Before Working Inside Your Computer. 2. Remove the: a. Side cover b. Front bezel c. 2.5-inch hard drive assembly 3. To remove the drive: a. Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1]. b. Lift the drive out of the drive bracket [2]. c. Remove the drive from the bracket [3]. 28 Removing and installing components
2.
Close the
front panel door
.
3.
Install the:
a.
Front bezel
b.
Side cover
4.
Follow the procedure in
After Working Inside Your Computer
.
2.5-inch hard drive
Removing the 2.5–inch drive from the drive bracket
1.
Follow the procedure in
Before Working Inside Your Computer
.
2.
Remove the:
a.
Side cover
b.
Front bezel
c.
2.5-inch hard drive assembly
3.
To remove the drive:
a.
Pull one side of the drive bracket to disengage the pins on the bracket from the slots on the drive [1].
b.
Lift the drive out of the drive bracket [2].
c.
Remove the drive from the bracket [3].
28
Removing and installing components