Dell OptiPlex 7070 Tower Service Manual - Page 57
Installing heatsink assembly, Tighten the screws in a sequential order 1
![]() |
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Installing heatsink assembly 1. Align the screws of the heatsink assembly with the holders on the system board and place the heatsink assembly on the processor [1]. 2. Tighten the captive screws to secure the heatsink assembly to the system board [2]. NOTE: Tighten the screws in a sequential order (1,2,3,4) as printed on the system board. 3. Connect the heatsink fan assembly cable from the connector on the system board [3]. Removing and installing components 57
![](/manual_guide/products/dell-optiplex-7070-tower-service-manual-4184661/57.png)
Installing heatsink assembly
1.
Align the screws of the heatsink assembly with the holders on the system board and place the heatsink assembly on the
processor [1].
2.
Tighten the captive screws to secure the heatsink assembly to the system board [2].
NOTE:
Tighten the screws in a sequential order (1,2,3,4) as printed on the system board.
3.
Connect the heatsink fan assembly cable from the connector on the system board [3].
Removing and installing components
57